Off-the-Road Radial – Premium quality from Thailand. Factory direct pricing.
Complete technical data for 29.5R25 Off-the-Road Radial tires. These specifications help you select the right tire for your application. Always verify compatibility with your vehicle manufacturer's recommendations.
| Parameter | Value |
|---|---|
| Tire Size | 29.5R25 |
| Tire Type | Off-the-Road Radial |
| Category | OTR |
| Recommended Rim | 25 x 12.00/1.5 |
| Load Index | 178 |
| Speed Symbol | A8 (40 km/h) |
| Ply Ratings Available | 24PR, 28PR, 32PR |
| Overall Diameter | 1895 mm |
| Section Width | 745 mm |
| Load Capacity | 7,250 kg |
| Inflation Pressure | 400 kPa |
| Tread Depth | 32-48 (varies by pattern) mm |
| Available Patterns | L-4, L-5 |
The 29.5R25 is a popular OTR tire size used primarily on mining loaders, large dozers, heavy quarry, underground mining. This tire size features a 1895mm overall diameter and 745mm section width, providing excellent flotation and load capacity for demanding applications.
29.5R25 tires are available in multiple tread patterns, each designed for specific operating conditions. The choice of pattern significantly affects tire life, traction, and cut resistance. Visit our Tire Pattern Guide for detailed pattern comparisons.
When selecting 29.5R25 tires, consider the following factors: operating surface conditions, average cycle times and speeds, ambient temperature, load per tire, and required tire life. Our technical team can help you select the optimal tire for your specific conditions. Proper tire selection maximizes productivity and minimizes cost per hour of operation.
For more information on selecting the right OTR tire, visit our OTR Tire Guide and Mining Tire Guide.
Buyers searching for 29.5R25 also frequently search for these related sizes:
29.5R25 is used on the largest wheel loaders in mining and heavy quarry applications. It provides maximum flotation and load capacity in the 25-inch rim class.
Standard load capacity is 7,250 kg per tire at rated pressure.
L-4 and L-5 are the primary patterns for this size. L-5 is recommended for severe mining conditions.
For mining, 28PR or 32PR is recommended. For quarry use, 24PR may be sufficient.
Tell us your requirements and we'll respond within 4 hours.